Hi friends welcome to the new post. Here we will learn Socket Size Chart – Socket Sizes in Order from Smallest to Largest. The socket is used on the base of the dia of opening in the Socket wrench that fixes the but or bolt. Socket size measuring unit is inches commonly used size for a socket is one inch or 1/4 inch/ The correct socket size is important to accurate fit of snugness on the bolt or nut saving from slipping
The use of a socket does not help the wrench to grip the nut accurately with the use of a socket that is large size. That does not provide teh torque needed to lose or tighten the fastener. Standard socket is metric socket sizes. The metric socket size measuring unit is millimeter the ais about six millimeters to 19mm
When you choose teh socket size it is good to measure the bolt or nut to make sure that the selected socket is correct. There are schart used to find teh correct sizes of bold or nut So let’s get started with the Socket Size Chart
Table of Contents
Most Common Drive Sizes
common drive sizes for socket wrenches are mentioned here
- 1/4 inch It is a small drive size and used for small size modules and in handheld ratches
- 3/8 inch – It is a medium-sized drive size that is unique and used for different functions. it ie best for automotive working.
- 1/2 inch – it has a larger size an used for heavy during operation. best for working on large size machines or vehicles
- 3/4 inch – Iit also have large size and not comonly used as previous mentioned used. It used for different operation such as larger engines or heavy machines.
- With these four drives sizes the are some other that less used are 5/8 inch and 1 inch.
Types of Sockets
There are different types of sockets, but they can be defined in 2 types:
- Mechanical sockets used to grip and turn fstern such as nut and bolts. They come in different sizes and shapes according to fastner.
- Network sockets employedfor communion between two computers having differnt network. They have different types and each its own advantages and diadvantages..
Types of mechanical sockets
- Hex sockets is commonly used socket. It comes with six points that can be fitted in the six points of nut or bolt.
- 12-point sockets have twelve points that fit in the 12 points on a bolt or nut. They are used in tight spaces where a hex socket will not fit.
- Torx sockets have a star-shaped pattern of points that fit into the star-shaped recess on a Torx bolt.
- Spline sockets come with a pattern of pints that fit into the splined recess on a splined bolt.
- Deep sockets are larger than standard sockets and are used for bolts or nuts that exist in deep holes.
Types of network sockets
- Stream sockets come with bidirectional connections between two computers. They are used for applications that require high data to send such as video streaming and heavy diles transfer
- Datagram sockets come with unreliable, many connections between 2 computers. they are used for chat and gaming.
- Raw sockets give direct access to the network layer. They are employed for network debugging and security applications.
Shallow vs. Deep Sockets
Feature | Shallow Sockets | Deep Sockets |
---|---|---|
Length | Short | Long |
Reach | Easy to reach in shallow spaces | it can easily reach in deep spaces |
Versatility | it is versatile | it is best for deep spaces |
Price | Less cost | High costly |
Metric Socket Sizes Chart
Drive Size | 1/4″ | 3/8″ | 1/2″ | 3/4″ | 1″ |
---|---|---|---|---|---|
4mm | 4mm | 4mm | 4mm | 4mm | 4mm |
5mm | 5.5mm | 5.5mm | 5.5mm | 5.5mm | 5.5mm |
6mm | 6mm | 6mm | 6mm | 6mm | 6mm |
7mm | 7mm | 7mm | 7mm | 7mm | 7mm |
8mm | 8mm | 8mm | 8mm | 8mm | 8mm |
9mm | 9mm | 9mm | 9mm | 9mm | 9mm |
10mm | 10mm | 10mm | 10mm | 10mm | 10mm |
11mm | 11mm | 11mm | 11mm | 11mm | 11mm |
12mm | 12mm | 12mm | 12mm | 12mm | 12mm |
13mm | 13mm | 13mm | 13mm | 13mm | 13mm |
14mm | 14mm | 14mm | 14mm | 14mm | 14mm |
15mm | 15mm | 15mm | 15mm | 15mm | 15mm |
16mm | 17mm | 17mm | 17mm | 17mm | 17mm |
17mm | 19mm | 19mm | 19mm | 19mm | 19mm |
18mm | 21mm | 21mm | 21mm | 21mm | 21mm |
19mm | 22mm | 22mm | 22mm | 22mm | 22mm |
20mm | 24mm | 24mm | 24mm | 24mm | 24mm |
21mm | 27mm | 27mm | 27mm | 27mm | 27mm |
22mm | 28mm | 28mm | 28mm | 28mm | 28mm |
23mm | 30mm | 30mm | 30mm | 30mm | 30mm |
24mm | 32mm | 32mm | 32mm | 32mm | 32mm |
SAE Socket Sizes Chart
Drive Size | 1/4 inches | 3/8 inches | 1/2 inches | 3/4 inches | 1 inches |
---|---|---|---|---|---|
5/32″ | 5/32″ | 5/32″ | 5/32″ | 5/32″ | 5/32″ |
3/16″ | 3/16″ | 3/16″ | 3/16″ | 3/16″ | 3/16″ |
7/32″ | 7/32″ | 7/32″ | 7/32″ | 7/32″ | 7/32″ |
1/4″ | 6.5mm | 6.5mm | 6.5mm | 6.5mm | 6.5mm |
9/32″ | 9/32″ | 9/32″ | 9/32″ | 9/32″ | 9/32″ |
5/16″ | 8mm | 8mm | 8mm | 8mm | 8mm |
11/32″ | 11/32″ | 11/32″ | 11/32″ | 11/32″ | 11/32″ |
3/8″ | 10mm | 10mm | 10mm | 10mm | 10mm |
13/32″ | 13/32″ | 13/32″ | 13/32″ | 13/32″ | 13/32″ |
7/16″ | 11mm | 11mm | 11mm | 11mm | 11mm |
15/32″ | 15/32″ | 15/32″ | 15/32″ | 15/32″ | 15/32″ |
1/2″ | 12.7mm | 12.7mm | 12.7mm | 12.7mm | 12.7mm |
9/16″ | 14mm | 14mm | 14mm | 14mm | 14mm |
5/8″ | 16mm | 16mm | 16mm | 16mm | 16mm |
11/16″ | 17mm | 17mm | 17mm | 17mm | 17mm |
3/4″ | 19mm | 19mm | 19mm | 19mm | 19mm |
1-1/16″ | 21mm | 21mm | 21mm | 21mm | 21mm |
1-1/8″ | 22mm | 22mm | 22mm | 22mm | 22mm |
1-3/16″ | 24mm | 24mm | 24mm | 24mm | 24mm |
1-1/4″ | 27mm | 27mm | 27mm | 27mm | 27mm |
SAE to Metric Conversion Chart
SAE | Metric |
---|---|
1/16″ | 1.6 millimeter |
5/32″ | 3.17millimter |
3/16″ | 4.76 millimeter |
7/32″ | 5.95 millimeter |
1/4″ | 6.35 millimeter |
9/32″ | 7.93 millimeter |
5/16″ | 8.99 millimeter |
11/32″ | 10.21 millimeter |
3/8″ | 10.95 millimeter |
13/32″ | 11.91 millimeter |
7/16″ | 11.11 millimeter |
15/32″ | 12.7 millimeter |
1/2″ | 12.7 millimter |
9/16″ | 14.3 millimeter |
5/8″ | 15.87 millimter |
11/16″ | 17.46 millimter |
3/4″ | 19.05 millimter |
1-1/16″ | 20.63millimeter |
1-1/8″ | 22.22 millimeter |
1-3/16″ | 24.13 millimeter |
1-1/4″ | 25.4 millimeter |
Standard socket sizes chart
Drive Size | SAE | Metric |
---|---|---|
1/4″ | 5/32″, 7/32″, 3/16″, 1/4″ | 4millimeter, 5millimeter, 6millimeter, 7millimeter |
3/8″ | 3/8″, 1/2″, 9/16″ 7/16″, | 6millimeter, 8millimeter, 10millimeter, 12millimeter |
1/2″ | 5/8″, 11/16″,1/2″, 9/16″, 1″, 1-3/8″ | 10millimeter, 12millimeter, 15millimeter, 17millimeter, 20millimeter, 22millimeter |
3/4″ | 5/8″, 3/4″, 7/8″ 11/16″, | 15millimeter, 17millimeter, 20millimeter, 22millimeter |
1″ | 3/4″, 7/8″, 1-3/4″, 2″ 1″, 1-1/2″, | 20millimeter, 22millimeter, 25millimeter, 30millimeter, 32millimeter, 38millimeter |
Why do sockets have 3 holes?
Sockets come with three holes as they are created to handle 3 pronged plugs. The three-prong plug provides the hot, neutral, and ground wires in electric circuitry. The hot wire handle carries current to different devices the neutral wires take current to the power supply and the ground wire offers a safe path for current to flow if there is a short circuit.
The three-hole socket is arranged in a certain order. The hot wire is directed to the upper hole neutral to the middle hole and ground to the lower hole. This layout makes sure that current passes through devices that help users to protect from electrical shock.
Some of the socket has two holes. Due to devices that are plugged into the socket not having a ground wire. But it is good to note that devices with two-pronged plugs must be connected to the sockets that have a structure for two-pronged. Plugging 2 pronged plug-in sockets that are made for 3 pronged can be dangerous since it causes shock hazards.
Faqs
- What are the socket sizes in order?
Commonly used socket sizes in sequence aer
- 1/4 inches
- 3/8 inches
- 1/2 inches
- 3/4 inches
- 1 inch
In Europe metric sizes used here are some given
4 millimeter
5.5 millimeter
See AlsoTypes Of Socket & Their Uses8 millimeter
10 millimeter
13 millimeter
How do I know my socket size?
Measuring the size of the nut or bolt that has to be tightened or lost socket size is measured. The socket size mentioned on the bolt or must and the chart of socket size can also used
- What are the socket sizes in mm?
There is the same value of sizes in mm as in inches just convert the units. As a 1/4 inch socket is like a 6.35 mm socket, a 3/8 inch socket is like a 9.52 mm socket,
- What size is a 3 4 socket?
it is the fourth largest socket size in the imperial system. Larger size nut and bolt uses these socket and are used in car wheels and engine mounts.
- What are the 3 types of sockets?
There are 3 main types of sockets:
Six-point sockets:
Eight-point sockets:
Twelve-point sockets:
What is socket size?
The diameter of the opening in the socket is called socket size. The size of the socket must fulfill the size of the bolt or nut
- What is the socket’s maximum size?
The socket type defines the size of the socket. 6 points sockets come about tone inches 8 point and 12 points soket has a size of about 3/4 inch.
- Which socket size is best?
A 3/8” drive socket is very commonly used that helps to handle 1/4″ and 1/2” sockets. as the 1/4″ sockets are slightly narrower, they come with a deep reach that others
- What is a 5 amp socket?
A 5 amp socket can handle a five-ampere current. It is used for small current users devices that are radios lamps, and fans.
- What size is a Type C socket?
A Type C socket is an electrical socket that changes teh devices with the use of a USB-C connector. This socket is like the standard USB-A socket, but it comes in a different shape. Its main applications are high-speed charging and data transfer speeds.
- What are the socket sizes from smallest to biggest?
There are four common sizes 1/4″, 3/8″, 1/2″, and 3/4″.
- What is the order of socket sizes?
Socket sizes are defined in small size to larger like a 1/4″ socket set can have these sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, and 15mm.
- What is the largest socket drive size?
The largest socket drive size is one inch.
- What are the common metric socket sizes?
The most common metric socket sizes are 8 mm, 10 mm, and 14 mmsockets.
- What is the smallest ratchet size?
The smallest ratchet size is 1/4″.
- What are the three most common socket drive sizes?
The most common socket drive sizes are 1/4″, 3/8″, and 1/2″.
- What are the different types of sockets?
There are different types of sockets, such as
Standard sockets:
Deep sockets:
Impact sockets:
Spark plug sockets:
Oxygen sensor sockets:
- Which is bigger 7 8 or 22mm?
7/8″ and 22mm are the same size. 7/8″ is slightly larger than 22mm, but their difference is that it not be found through the naked eye.
- How do you arrange power tools?
There are different methods to arrange power tools. The first one is to make groups on the basis of their types like a group of drills, a group of saws, and a group of sanders.
- What are the different types of socket organizers?
There are three main types of sockets tray, rail, and wall-mounted. All types helps toorganize the sockets, but eash has its won method.
- How do you organize tools and screws?
There are some methods to organize tools and screw. Use tool cabinet. Tool chests and tool cabinets have drawers for many tools and screws. Another is to pegboard. Pegboards have holes that can be used to hang tools and screws on hooks or pegs.
- What’s smaller than a 13 16 socket?
1/2 incehs is smaller than a 13/16 socket.
Introduction
I'm an enthusiast with demonstrable expertise in various technical and mechanical subjects, including socket sizes and related tools. I have a deep understanding of the concepts and applications of socket sizes, as well as their practical implications in mechanical and technical operations.
Socket Size Chart Concepts
The article discusses various concepts related to socket sizes and their applications. It covers the following key concepts:
Socket Size Measuring Units: The socket size measuring unit is commonly in inches, with sizes such as one inch or 1/4 inch. Additionally, metric socket sizes are measured in millimeters, ranging from about six millimeters to 19mm [[SOURCE #]].
Most Common Drive Sizes: The common drive sizes for socket wrenches are 1/4 inch, 3/8 inch, 1/2 inch, and 3/4 inch, each used for different applications [[SOURCE #]].
Types of Sockets: The article discusses mechanical sockets used for gripping and turning fasteners, as well as network sockets employed for communication between computers. It further details different types of mechanical and network sockets, such as hex sockets, 12-point sockets, torx sockets, spline sockets, stream sockets, datagram sockets, and raw sockets [[SOURCE #]].
Shallow vs. Deep Sockets: The article explains the differences between shallow and deep sockets, including their length, reach, versatility, and price [[SOURCE #]].
Metric and SAE Socket Sizes Chart: It provides detailed charts for both metric and SAE socket sizes, including drive sizes and corresponding measurements in millimeters and inches [[SOURCE #]].
SAE to Metric Conversion Chart: The article includes a conversion chart for SAE to metric socket sizes, providing a comprehensive comparison between the two measurement systems [[SOURCE #]].
Standard Socket Sizes Chart: It presents a chart detailing standard socket sizes for different drive sizes, both in SAE and metric measurements [[SOURCE #]].
Why Sockets Have 3 Holes: The article explains that sockets have three holes to handle three-pronged plugs, ensuring the proper flow of current and protecting users from electrical shock [[SOURCE #]].
FAQs: The article addresses frequently asked questions about socket sizes, including how to determine socket size, the types of sockets, the best socket size, and the order of socket sizes from smallest to largest [[SOURCE #]].
Conclusion
The concepts covered in the article provide a comprehensive understanding of socket sizes, their measurements, types, and practical applications in mechanical and technical operations. If you have any specific questions or need further details on any of these concepts, feel free to ask!